Tuesday, 07th February 2006

Chip

Yaaaaaaaaay!

Work.

I'm currently working on a PIC programmer. I have it 90% assembled. I bought a clear topped box to mount it in. I am drawing it now in Inventor to decide how I am going to mount the ZIF socket in the lid of the box. Currently I am drawing the ZIF socket it's self. It's a 3 layer device, the centre layer slides between the top and bottom layers along it's length, actuated by a small lever with a cam on it. This action opens and closes small V shaped contacts that when closed make contact with the legs of the device mounted in it. It's proving a tricky task to draw it with only a rule to measure it with. I can't wait to get my verniers. I think where I have placed the top screws to hold the top on are incorrectly measured. Maybe it’s just an optical illusion. I know for a fact though, the bottom layer is wrong with respect to the raised area on the other side of the cam end. I will have to check it! Pictures later when I can do screen exports more than 800x600 Thumbs Down!

Next entry

Previous entry

Similar entries