Whoa! I'm up to my backside, well my shoulders if you stack them on top of each other in server gear! It's nice to finally get going properly on actual server gear for this site. Monolith01 and Monolith02 got an upgrade today. The 667s in Monolith01 flowed down to 02 and it's 550s went to 03.

Monolith01:

• Dual P3 733MHz/133MHz FSB
• 256MB PC133 ECC SDRAM
• 6 x 9.1 GB U160 SCSI drives (2 x 9.1 [Atlas 10K Vs] RAID 1 - 9.1GB, 4 x 9.1  [Atlas 10K IVs] RAID 5 - 25.5GB) running off a DELL PERC2/SC RAID controller.

Monolith02 (Planned): 

• Dual P3 667MHz/133MHz FSB
• 256MB PC133 ECC SDRAM 
• 1 x 18.2GB U160 SCSI Drive running off embedded U2W SCSI on mainboard.
• 1 x 20GB IDE running off 2 x ATA133 PCI RAID card.

Monolith03 (Planned - pending essential parts like ummm, RAM?!)

• Dual P3 550MHz/100MHz FSB (Possible Single P3 1.0GHz depending on slotket compatibility)
• No RAM Yet
• No Drives Yet