RC Day today! Josh is coming over with is lunchbox and we're going down the park!

I nearly struck disaster though. My charger would not make a connection to the battery, so, I broke out the other mechanical charger - which was also borked. I took it apart and worked on it. The problem was threefold, one there were a number of dry joints about the place, two the trickle indicator globe was shorted and the ammeter shunt was not actually connected to the board!!! This meant that the charger was trying to charge the battery through the windings of the ammeter! I fixed all of this and re-assembled. It was now fine. The original charger, upon checking wasn't receiving the full 13.8 volts from the power supply - there was a corroded contact on the fuse holder which was to blame. A little scrape and re-fitting of the fuse and we're up again! Two working chargers, now that I have spent the time to fix the older one! I think I will keep the older one as it has a discharge function too. The circuit is also much more robust using a pair of 20W resistors as shunts.

IMG_2931.jpg

IMG_2934.jpg

Should be a good day!