Testing this Chinese eBay power supply unit under load with halogens before I fit it. It's going in a TV at work that we are resurrecting. The TV has some stupid external power supply with an even stupider 4 pin security connector on it. I am fitting this inside the TV chassis and fitting an IEC connector on the bottom of the screen so it takes mains directly.

Looks like the engine won't start because the ECU is unhappy that this sensor line is shorted to ground. The loom appears to have rubbed though. A bit of heat shrink and some solder and it's all good.

Mail flows again from my LAN. I managed to totally destroy the config on the exim smarthost... Puppet giveth, puppet can taketh away lol. It was in the wrong host group. #puppetize :D

Playing around with a top view magic eye tube: The 6E5. Also a demo of the GR-211 Tubes and some detail on the sockets that I made for them.