My Element14 order turned up with my Roadrunner pencil wire. RRW-A-105 0.19mm solderable enamel wire. The colours will help distinguish some different lines in some upcoming projects (garden lights) where I need to run vcc, gnd and a data line. They need to be fine so as not to obstruct the light.

2gig LAG established from the Cisco 2960G-48 in the house to the Juniper EX3200 switch in the shed where the servers are.

Sonoffs have arrived from itead.cc to play with!

At last the finished product! Fully soldered with paste and hot air, with terminals mounted and mounted in it's DIN rail enclosure ready to go.

I came across these cheap solar LED garden lights and immediately knew what I needed to do. They needed to be individually addressable, RGB and controllable from IOT and from an app! =) Probably ESP8266 at this stage with ws2812 LEDs.