Scored a head unit that had AUX input, so I installed it in the car with a special IP-BUS cable.

Cleaned out the throttle body. It's pretty gross. The crankcase breather behind the butterfly was totally clogged.

I have "un-bodged" the EGR on the Barina after a lot of de-gunking and scraping of the mating surface of the block. Whoever had bypassed the EGR used a piece of tin (which is fine), but they also use this horrible grey gunk which was a pain. There was also a slug of the stuff in the intake side of the EGR manifold! Thankfully they also gunked the original aluminum gasket in with the tin, I was able to recover it. I bypassed the EGR this time around with a piece of coke can. Click the image on the right to see the rest of the photos.

Today I pulled the back seat out of the barina so that I could get to the innards of the seat release. I have temporarily put a cable tie around the tie rod that is snapped off the plastic release button so that I can at least actuate it and release the seat.