Zagadka's Site

I have "un-bodged" the EGR on the Barina after a lot of de-gunking and scraping of the mating surface of the block. Whoever had bypassed the EGR used a piece of tin (which is fine), but they also use this horrible grey gunk which was a pain. There was also a slug of the stuff in the intake side of the EGR manifold! Thankfully they also gunked the original aluminum gasket in with the tin, I was able to recover it. I bypassed the EGR this time around with a piece of coke can. Click the image on the right to see the rest of the photos.